Mathematical calculation is a completely new approach which sets new standards in dentistry and dental technology. Clearly defined reference points, unknown to date in dentistry, have no replaced relative reference parameters. Making available for the first time a process for calculating a patient's natural dentition, regardless of his or her current dental situation.
Testimonials
“For the past year I have had the opportunity to utilize the Staub Cranial System for several full denture cases and be present in the operatory for the clinical appointments. In every case the dentist and the patient were thoroughly impressed with the results. The biggest advantage for the customer is the ease in establishing jaw relations with the system as well as reducing the number of clinical appointments. The accuracy achieved with this system is remarkable and I would not hesitate to recommend it to any technician or dentist.”
Bruce Keeling, CDT
Technical Consultant
Dental Services Group
Staub Cranial is the only system in my 24 years of removals that articulates the master cast and mathematically positions teeth from your impression. No upper wax rim and with basic understanding of model analyzes you will be able to approach any dental situation, with a completely different view. It truly is as easy as 1,2,3 impression, try-in and finish. It takes away all the guess work!
Barbara Blanchette CDT
Owner
B&R Dental Lab
San Antonio TX
"For 35 years I settled for the "guess and reset" technique for making full dentures. I was skeptical of the claims that were being made by Staub Cranial; accurate tooth positioning with near zero resets. Even after I had taken the innovative training, I was skeptical. When I returned to the bench and began using what I had learned, I was flabbergasted! Not only was it successful, I was able to set a full upper independent of the natural lowers, and after mounting to a bite, the midline and overbite/overjet were dead on! It may sound impossible, but I proved it over and over again. Staub Cranial may be the best, most revolutionary concept in full denture construction since George Washington's ivory and wood set."
Gary Pericak
WOW!!! I am a skeptic no more!!! The STAUB CRANIAL SYSTEM has it all. Our level of treatment planning and success has come to new levels of precision when previously at high levels.
The training is the best that I have ever taken. The support is outstanding. The staff at Select Dental Supply are excellent. If you want to be involved in the future industry standard Take this course and buy this system. The uses and possibilities are still being rewritten every day.
This system is attracting so much new business for us that our removable only lab will be full service within the near future.
Brian Sedgwick
Owner
Sedgwick's Dental Lab
Sacramento CA
"My initial reaction to the Staub Cranial was that this was yet just another twist for setting denture teeth. What I discovered was exactly opposite.
Staub is a revolutionary breakthrough technique which uses scientific measurements for the accurate placement of denture teeth --eliminating guesswork. Far superior to any conventional methods, I see a day in the near future where it will rapidly become the most accepted way in dentistry to set artificial teeth, not to mention numerous other prosthetic applications."
"The results are hard to overlook. Saves both the dentist and laboratory precious time and money -- positively impacting the quality of their work, building shared business successes as well as improved patient relationships."
Stanley W. Wilcox, CDT
Removable Laboratory Manager
DSG Davis Dental Laboratory
I have been making dentures for quite a few years. Staub is the first set of instruments that will make you start at the same point every time. So if something does go wrong, at least you know where you started. This will help you find the problems with a case. It will also help you treatment plan large difficult cases.
Especially implant cases where you spend a lot of money on parts. I have done over 100 cases with great results. You will also notice there are less resets and less patient visits. The time savings to the doctor and patient are also a plus. I would recommend this system to anyone who is interested in high end results.
Mike Lerch, CDT
Easy Tech Training
Trained technicians are hard to come by especially now that many former schools have closed their doors. Experienced technicians demand higher salaries and are often “set in their ways”. The process of training someone is costly and time consuming.
Many techniques in the lab can be taught easily but one that remains mysterious is how to place the teeth in the proper physiological position. Very little information is available on the subject of tooth placement. Dental technicians are often left to there own subjective inclinations when restoring a dental situation. The setting of teeth both in removable and fixed applications is the most difficult and time consuming training in dental technology.
With Staub Cranial even a non- technician can be taught proper tooth position in a matter of a few hours. With a little practice all lab employees will understand this process and easily implement it in a production status. Training manuals that are easy to read and understand are available to all that invest in this system. These will act as a standard operating procedure so that everyone will be at the same level of understanding. Productivity will increase as well as profit margins. Properly trained technicians are the greatest asset in business, start training today!
No More Resets
Could it really be possible to have no more resets! What would that do to production costs, profitability, and cost of materials!
With Staub Cranial restorations are produced with mathematical accuracy which leaves very little if any room for error. Doctors, technicians, and patients will be pleased with the results.
Start using Staub Cranial today and throw those resets and redoes away!
Business Builder
Dentists are looking for the lab that can help them with their difficult restorative decisions. Staub™ Cranial gives the doctors a patient specific physiologic envelope from which to make decisions about midline, incisal plane, over all vertical dimensions and placement relative to the joint. Your lab becomes the go-to-solutions, the preferred choice for restorative services.
Cost Calculator
As you'll soon find out it doesn't take long to get a return on your investment with the Staub Cranial System. Simply fill in the form below to find out how long it will take.
Find us Offline
Staub Cranial
by Select Dental Supply
1220 N. 500 West
Lehi, Utah 84043
info@staubcranial.com
801-766-4577
Documented Results
Freiburg University Study
During his research on more than 5500 different models, K.H. Staub was able to demonstrate constant parameters in both the maxilla and mandible which had been unknown in dentistry up until now. This research has resulted in the creation of the Staub™ Cranial Dental System.
This article shows the results of a study done by Freiburg University Hospital that the Staub Cranial Dental System is 95% accurate.
Freiburg University Hospital, Germany
Outpatient Clinic for Dental Prosthetic Medical Director: Prof. J.R. Strub
Authoren: ZA Panos Lampropoulos, Freiburg
Dipl.-Math. Dr. Thomas Gerds, Freiburg
PD Dr. Jens C.Türp, Freiburg/Basel
Reconstruction of tooth positions using the Staub Cranial System Aim: The Staub Cranial System, developed by master dental technician Karl-Heinz Staub (Neu-Ulm, Germany), is based on defined anatomical reference points which should be present in every jaw model with unalterable positions. The aim of the study was to check the ability of the Staub method to reconstruct the former position of lost teeth in an edentulous jaw.
Materials and methods: Two maxillary alginate impressions were taken and filled with hard plaster in each of 20 completely dentulous subjects with no history of orthodontic treatment. All teeth were erased with a plaster cutter in one of the two models made for each participant in the study. Master dental technician Staub, who was unaware of the baseline situation, drew up a list of tooth positions for each of the 20 edentulous models. The spaces were subsequently determined between the mesiobuccal cusp tips of replacement teeth 16 and 26, between the canine tips of replacement teeth 13 and 23, and between the cutting edge of replacement tooth 11 and the highest point of the gingival margin.
Measurements were made using the principle of stripe projection, a non-contact method of recording surface contours, and using specially developed software (Topoline; Institute of Laser Technology in Medicine and Measurement Technology at Ulm University, Germany). The 20 control models were measured in the same way. Then the number of reconstructed models was determined whose distances measured deviated > 5 % from the mean values of the distances measured for the 20 control models.
Results: Study shows the estimated rates at which a tooth position can be reconstructed with no, one, two or three deviations. Tooth positions could be reproduced with no, or at the most one, deviation in 80 % of the models (95 % CL = 56-94%).
Discussion: The results indicate that the Staub method is astonishingly well able to reconstruct the former position of lost teeth.
